![[]()
20GGMA6111 Kit Features: -Attractive and discreet housing.-Aluminum weather resistant housing.-High quality commercial grade materials.-Fully automatic operation when used with a Cummins Onan Automatic Transfer Panel.-Lockable access doors.-Self-diagnostic capability.-Modest maintenance requirements.-Electronic governor for precise frequency control.-Listed to UL2200.-Standard 150 mph certified wind load rating.-Fully enclosed muffler.-Insulated heat shield.-Insulation system: Class H per NEMA MG1-1.65 and BS2757.-Temperature rise: At rated load is less than 125 C at standby rating perNEMA MG1.22.40 IEEE 115 and IEC 34-1.-Excitor type: The excitation system derives is a self (shant) excited system with the voltage directly from the generator set output..-Alternator Cooling: Direct-drive centrifugal blower.-Rotor: Supported by a pre-lubricated maintenance-free ball bearing.-AC Wave form total harmonic distortion: less than 5pct total no load to full load.-Electronic ignition.-Electronic governor.-Full pressure lubrication.-High-capacity oil sump spin-on filter.-Solenoid shift starter.-60-Amp engine-driven battery charger.-GM Industrial spark-ignited engine.-In-line 4-cylinder liquid-cooled design.-Compression Ratio: 10:5:1.-Displacement: 181 cu in (3.0 cc).-Cooling system: 127 F (53 C) ambient cooling system.-Oil sump capacity: 4.5 qt (4.3 L) with filter.-Operating speed: 1800 rpm.-Automatic remote starting.-Controls generator set starting and shutdown.-Control components designed to withstand the vibration levels typical in generator sets.-Field circuit breaker.-High temperature low oil pressure overcrank and overspeed shutdown.-Running time meter.-90-Amp UL-listed circuit breaker.-DC control fuse.-Time delay start / stop.-Battery condition meter.-Running (rated) watts: 20000.-kVa: 25.-Voltage regulation: +/- 1pct no load to full load.-Rated Amperage: 83.3.-Circuit breaker: 90-amp 2-pole.-Frequency regulation: Isochronous 0pct no load to full load.-UL[]